Development of Monitoring Tower Using Gyroscope Sensor Based on Esp32 Microcontroller
DOI:
https://doi.org/10.37385/jaets.v4i1.1327Keywords:
Monitoring, Tower, Gyroscope Sensor, MicrocontrollerAbstract
This research is a research and development research that aims to find out the results of the development of tower slope monitoring tools using the ESP32 Microcontroller-Based Sensor Gyroscope and find out the test results of the tool tower tilt monitoring using the ESP32 Microcontroller-Based Gyroscope Sensor. The development model used in this study is a prototyping model with stages of collecting needs, building prototypes, evaluating prototypes, coding s i stem, testing sistem, evaluation sistem, use s istem. The data used are interviews, questionnaires, observations and measurements. The data were analyzed using descriptive statistical analysis techniques. Based on the results of this study, a prototype of a tower slope monitoring tool was produced that was used to monitor the slope of the tower remotely through the telegram application. From the test results of the tower tilt monitoring tool using the MPU6050 gyroscope sensor based on the ESP32 microcontroller, it was found that the average time it takes to receive notifications if they occur the slope is 3.21 seconds. The results of the pecan test n there is a difference in the angle read at a height of 1 meter is 0.3 degrees, a height of 2 meters 0.2 degrees, a height of 3 meters 0.22 degrees, and a height of 4 meters 0.18 degrees. The results of the functional suitability test show that the tool functions as designed. The usability characteristic of the tower slope monitoring tool gets an average score of being included in the excellent category.
Downloads
References
Abdelwahed, B. (2019). A review on building progressive collapse, survey and discussion. Case Studies in Construction Materials, 11, e00264.
Dako, R. D., & Ridwan, W. (2021). Pengujian karakteristik Functional Suitability dan Performance Efficiency tesadaptif. net. Jambura Journal of Electrical and Electronics Engineering, 3(2), 66-71.
Feng, H., Wang, K., Yue, Y., & Hu, P. (2021, May). Analysis of influence of coal mining on stability of tower on Loess Slope and deformation monitoring. In IOP Conference Series: Earth and Environmental Science (Vol. 772, No. 1, p. 012098). IOP Publishing.
Idris, A. R., Usman, U., & Suyono, W. (2021). Analisis Pengaruh Pemasangan Counterpoise pada Tower Transmisi Saluran Udara Tegangan Tinggi 70 kV Line Mandai-Pangkep. Seminar Nasional Teknik Elektro Dan Informatika (SNTEI), September, 104–109.
Keshari, S. R., Chandramohan, V. P., & Das, P. (2021). A 3D numerical study to evaluate optimum collector inclination angle of Manzanares solar updraft tower power plant. Solar Energy, 226, 455-467.
Kurniawan, A. D. (2020). Design and Implementation of Home Security Using Telegram Botfather. FIDELITY: Jurnal Teknik Elektro, 2(1), 11-15.
Made Dwi Mulyawan, dkk. (2021). Kualitas Sistem Informasi Berdasarkan ISO/IEC 25010: Literature Review. Majalah Ilmiah Teknologi Elektro, Vol. 20, No.1, Januari – Juni 2021, 15-27.
Malviya, S., & Jamle, S. (2019). Determination of Optimum Location of Rooftop Telecommunication Tower over Multistory Building under Seismic Loading. International Journal of Advanced Engineering Research and Science.
Muslih, M., Supardi, D., Multipi, E., Nyaman, Y. M., & Rismawan, A. (2018, September). Developing smart workspace based IOT with artificial intelligence using telegram chatbot. In 2018 International Conference on Computing, Engineering, and Design (ICCED) (pp. 230-234). IEEE.
Pressman, R. S. (2012). Rekayasa perangkat lunak Pendekatan Praktisi. Yogyakarta: Penerbit Andi.
Rymarczyk, J. (2020). Technologies, opportunities and challenges of the industrial revolution 4.0: theoretical considerations. Entrepreneurial business and economics review, 8(1), 185-198.
Seran, M. (2017). Analisa Struktur Tower BTS Berdasarkan Hasil Re-Verticality Menggunakan Staad Pro. Eureka: Jurnal penelitian teknik sipil dan teknik kimia, 1(1).
Setiawan, A. W., Muhammad, F., & Hidayat, A. (2020, September). Development of an web-based wearable gait recognition system using gyroscope and accelerometer sensors. In 2020 International Seminar on Application for Technology of Information and Communication (iSemantic) (pp. 370-373). IEEE.
Sugiyono, D. (2013). Metode penelitian pendidikan pendekatan kuantitatif, kualitatif dan R&D.
Syufrijal, S. (2018). Prototipe Sistem Pengukuran Jarak dan Kemiringan Otomatis Menggunakan Mikrokontroler Berbasis Internet of Things (IoT). Autocracy: Jurnal Otomasi, Kendali, dan Aplikasi Industri, 5(02), 68-72.
Tsavdaridis, K. D., Nicolaou, A., Mistry, A. D., & Efthymiou, E. (2020, October). Topology optimisation of lattice telecommunication tower and performance-based design considering wind and ice loads. In Structures (Vol. 27, pp. 2379-2399). Elsevier.
Zhang, X., Zhang, Y., Zhang, L., Qiu, G., & Wei, D. (2018). Power transmission tower monitoring with hydrostatic leveling system: measurement refinement and performance evaluation. Journal of Sensors, 2018.
Zhang, X., Manogaran, G., & Muthu, B. (2021). IoT enabled integrated system for green energy into smart cities. Sustainable Energy Technologies and Assessments, 46, 101208.
CITEDNESS IN SCOPUS
CITEDNESS IN WOS
