The Development of Exhaust Fan Housing With Ceiling Mounting For High Rise Buildings by Using DFMA

Authors

  • Agri Suwandi Universitas Pancasila
  • Muhammad Pillar Rachmawanto Universitas Pancasila
  • Wina Libyawati Universitas Pancasila
  • Januar Parlaungan Siregar Universiti Malaysia Pahang

DOI:

https://doi.org/10.37385/jaets.v4i2.1675

Keywords:

DFMA, FE model, exhaust fan, manufacturing cost, total assembly

Abstract

Design for manufacturing and assembly (DFMA) is widely applied in many industries to optimize the manufacturing and assembly process at the early stage of design, with the aides of the CAD model. Many researchers apply the DFMA to increase assembly efficiency, by decreasing the number of parts from a product, decreasing the manufacturing cost, and reducing assembly time. Therefore, this research applies DFMA to develop exhaust fan housing with ceiling mounting for high rise building type with the same purpose, and at the same time to justify that the method can overcome the problem of assembly time in a production line. Both designs from before and after the application of DFMA, are being compared by using finite element simulation and experimental. The simulation employs stress analysis, to predict the strength of those designs. While the experimental uses a manufacturing cost survey, real assembly time survey and failure test to show the advantages of DFMA design results. The research result shows that the DFMA method can decrease the manufacturing cost by 0.44%, and the assembly time by up to 2%, and able to withstand the entire mass of the ceiling mounting fan.

Downloads

Download data is not yet available.

References

A. H. Satoshi Kagawa, A., Hayashi, T. K., & Osaka. (2013). Ceiling-embedded ventilation (Patent No. USO143481A1).

Barbosa, G. F., & Carvalho, J. de. (2013). Design for Manufacturing and Assembly methodology applied to aircrafts design and manufacturing. IFAC Proceedings Volumes, 46(7), 116–121.

Boothroyd, G., Dewhurst, P., & Knight, W. A. (2010). Product design for manufacture and assembly. CRC press.

Campi, F., Favi, C., Germani, M., & Mandolini, M. (2022). CAD-integrated design for manufacturing and assembly in mechanical design. International Journal of Computer Integrated Manufacturing, 35(3), 282–325.

Dametew, A. W., & Gebresenbet, T. (2017). Study the effects of spring back on sheet metal bending using mathematical methods. J Material Sci Eng, 6(382), 22–2169.

Edwards, K. L. (2002). Towards more strategic product design for manufacture and assembly: priorities for concurrent engineering. Materials & Design, 23(7), 651–656.

Effendi, M. S. M., Shayfull, Z., Radhwan, H., Ahmad, S. A. S., Rosley, S. N., Ramli, Y. N., Razak, M. F. A., & Ahamad, N. Z. (2021). Integrating DFMA to sustainability and FEA assessment: Case study of portable bluetooth speaker. AIP Conference Proceedings, 2347(1), 020096. https://doi.org/10.1063/5.0051982

Favi, C., Mandolini, M., Campi, F., Cicconi, P., Raffaeli, R., & Germani, M. (2021). Design for Manufacturing and Assembly: A Method for Rules Classification. In L. Roucoules, M. Paredes, B. Eynard, P. Morer Camo, & C. Rizzi (Eds.), Advances on Mechanics, Design Engineering and Manufacturing III (pp. 354–359). Springer International Publishing.

Ferreira, C. V., Biesek, F. L., & Scalice, R. K. (2021). Product innovation management model based on manufacturing readiness level (MRL), design for manufacturing and assembly (DFMA) and technology readiness level (TRL). Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(7), 360. https://doi.org/10.1007/s40430-021-03080-8

Formentini, G., Boix Rodríguez, N., & Favi, C. (2022). Design for manufacturing and assembly methods in the product development process of mechanical products: a systematic literature review. The International Journal of Advanced Manufacturing Technology, 120(7–8), 4307–4334.

Formentini, G., Bouissiere, F., Cuiller, C., Dereux, P.-E., & Favi, C. (2022). Conceptual Design for Assembly methodology formalization: systems installation analysis and manufacturing information integration in the design and development of aircraft architectures. Journal of Industrial Information Integration, 26, 100327.

Gbadamosi, A.-Q., Oyedele, L., Mahamadu, A.-M., Kusimo, H., Bilal, M., Davila Delgado, J. M., & Muhammed-Yakubu, N. (2020). Big data for Design Options Repository: Towards a DFMA approach for offsite construction. Automation in Construction, 120, 103388. https://doi.org/https://doi.org/10.1016/j.autcon.2020.103388

Geoffrey Boothroyd, Peter Dewhurst, W. A. K. (2010). Product Design for Manufacture and Assembly. https://doi.org/https://doi.org/10.1201/9781420089288

Harlalka, A., Naiju, C. D., Janardhanan, M. N., & Nielsen, I. (2016). Redesign of an in-market food processor for manufacturing cost reduction using DFMA methodology. Production & Manufacturing Research, 4(1), 209–227. https://doi.org/10.1080/21693277.2016.1261052

Liu, Z., Liu, J., Zhuang, C., & Wan, F. (2022). Multi-objective complex product assembly scheduling problem considering parallel team and worker skills. Journal of Manufacturing Systems, 63, 454–470.

Morimoto, Y., Honda, K., Nishimura, K., Tanaka, S., Takahashi, A., Shindo, H., & Kurosaki, M. (2002). Excellent Corrosion-resistant Zn-Al-Mg-Si Alloy Hot-dip Galvanized Steel Sheet" SUPER DYMA". Shinnittetsu Giho, 22–24.

Munanga, P., Chinguwa, S., Nyemba, W. R., & Mbohwa, C. (2020). Design for manufacture and assembly of an intelligent single axis solar tracking system. Procedia CIRP, 91, 571–576.

Naiju, C. D. (2021). DFMA for product designers: A review. Materials Today: Proceedings, 46, 7473–7478. https://doi.org/https://doi.org/10.1016/j.matpr.2021.01.134

Penlesky, R. G., & Karst, D. L. (2008). Modular ventilating exhaust fan assembly and method. Google Patents.

Samad, M. F. A., & George, K. Y. (2022). Application of Design for Manufacturing and Assembly (Dfma) Method to Vehicle Door Design. Defence S and T Technical Bulletin, 15(1), 34–41. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85127013775&partnerID=40&md5=9cdb9f75bace1dee4e8cd01c384a0750

Sharma, A., Kukshal, V., Agarwal, P., & Kapre, A. V. (2021). Approach Toward Design for Manufacturing Assembly of Fiber Reinforced Plastics Fan Blade for Cooling Tower. In A. Patnaik, E. Kozeschnik, & V. Kukshal (Eds.), Advances in Materials Processing and Manufacturing Applications (pp. 469–478). Springer Singapore.

Sossou, G., Demoly, F., Montavon, G., & Gomes, S. (2018). An additive manufacturing oriented design approach to mechanical assemblies. Journal of Computational Design and Engineering, 5(1), 3–18.

Subbaiah, A., & Antony, K. M. (2021). Integration of DFMA and sustainability - A case study. International Journal of Sustainable Engineering, 14(3), 343–356. https://doi.org/10.1080/19397038.2020.1871443

Sukarman, S., Abdulah, A., Shieddieque, A. D., Rahdiana, N., & Khoirudin, K. (2021). Optimization of the resistance spot welding process of secc-af and sgcc galvanized steel sheet using the taguchi method. Sinergi, 25(3), 319–328.

Suresh, P., Ramabalan, S., & Natarajan, U. (2016). Integration of DFE and DFMA for the sustainable development of an automotive component. International Journal of Sustainable Engineering, 9(2), 107–118. https://doi.org/10.1080/19397038.2015.1096313

Vaz-Serra, P., Wasim, M., & Egglestone, S. (2021). Design for manufacture and assembly: A case study for a prefabricated bathroom wet wall panel. Journal of Building Engineering, 44, 102849.

Wang, X., Liu, M., Ge, M., Ling, L., & Liu, C. (2015). Research on assembly quality adaptive control system for complex mechanical products assembly process under uncertainty. Computers in Industry, 74, 43–57.

Xu, M., Han, D., Zheng, Z., Ma, R., Du, A., Fan, Y., Zhao, X., & Cao, X. (2022). Effects of cooling rate on the microstructure and properties of hot-dipped Zn–Al–Mg coatings. Surface and Coatings Technology, 444, 128665.

Yuan, Z., Sun, C., & Wang, Y. (2018). Design for Manufacture and Assembly-oriented parametric design of prefabricated buildings. Automation in Construction, 88, 13–22.

Zakula, M., Jacak, C. S., & Hoshino, K. (2013). Lighting and ventilating system and method (Patent No. US8382332B2)

Downloads

Published

2023-06-05

How to Cite

Suwandi, A., Rachmawanto, M. P., Libyawati, W., & Siregar, J. P. (2023). The Development of Exhaust Fan Housing With Ceiling Mounting For High Rise Buildings by Using DFMA . Journal of Applied Engineering and Technological Science (JAETS), 4(2), 895–907. https://doi.org/10.37385/jaets.v4i2.1675