Analysis of Product Quality Control Using FTA (Fault Tree Analysis) Method

Authors

  • Gladies Putri Suprapto Universitas Pembangunan Nasional “Veteran” Jawa Timur
  • Dwi Sukma Donoriyanto Universitas Pembangunan Nasional “Veteran” Jawa Timur

DOI:

https://doi.org/10.37385/ijedr.v5i2.5154

Keywords:

Fault Tree Analysis, Defect, Upper, Shoes

Abstract

Shoes are one of the protectors of the human body as footwear used for daily activities. In addition to being a means of body protection, shoes are currently used as school uniforms. CV. Esa Kalen Jaya is a company that produces upper school shoes. But CV Essay Kalen Jaya experienced problems in the production, namely uncontrolled defective products produced by 1,542 pairs of upper shoes. So the need for analysis of the causes of defects and provide suggestions for quality improvement due to factors that cause product defects. To be able to determine the root cause of product defects used FTA (fault tree analysis) method.The result is that the cause of the occurrence of disability is caused by 9 factors. With improvement recommendations conduct training and evaluation on a regular basis to help improve the ability of workers in sewing so as to minimize errors.

References

Clifton A Ericson. (1999). Clif Ericson; Fault Tree analysis-A History from the Proceedings of The 17 th International System Safety Conference-1999. 1–9. http://www.fault-tree.net

Hariadi, A., Termawut, I., & Hafid, A. (2023). Analisis Resiko Kegagalan Jaringan Distribusi PLN Menggunakan Metode Fault Tree Analysis. IJESPG Journal, 1(3), 254–267. http://ijespgjournal.org

Iraz, G., & Suseno, S. (2023). ANALISIS PENGENDALIAN KUALITAS PRODUK COOKIES COKELAT DENGAN MENGGUNAKAN FMEA (FAILURE MODE AND EFFECT ANALYSIS) DAN FTA (FAULT TREE ANALYSIS) (Studi Kasus: Griya Cokelat Nglanggeran, Gunung Kidul). SENTRI: Jurnal Riset Ilmiah, 2(8), 3242–3250. https://doi.org/10.55681/sentri.v2i8.1392

Kiki, E., Lie, D., Efendi, E., & Sisca, S. (2019). Analisis Pengendalian Kualitas (Qualitycontrol) Untuk Meningkatkan Kualitas Produk Yang Dihasilkan Pada Cv Bina Tehnik Pematangsiantar. SULTANIST: Jurnal Manajemen Dan Keuangan, 7(1), 24–33. https://doi.org/10.37403/sultanist.v7i1.134

Markulik, S., Šolc, M., Petrík, J., Balážiková, M., Blaško, P., Kliment, J., & Bezák, M. (2021). Application of fta analysis for calculation of the probability of the failure of the pressure leaching process. Applied Sciences (Switzerland), 11(15). https://doi.org/10.3390/app11156731

Nurfatha, Z. R., & Herwanto, D. (2023). Vol . 09 | No . 02 , Mey 2023 ANALISIS PENGENDALIAN KUALITAS PADA UNIT SV-521 DI PT . XYZ Computer Science | Industrial Engineering | Mechanic Engineering | Civil Engineering J-ENSISTEC ( Journal of Engineering and Sustainable Technology ) Computer Scienc. 09(02), 766–773.

Puspasari, A., Mustomi, D., & Anggraeni, E. (2019). Proses Pengendalian Kualitas Produk Reject dalam Kualitas Kontrol pada PT. Yasufuku Indonesia Bekasi. Widya Cipta Jurnal Sekretari Dan Manajemen, 3(1), 71–78. http://ejournal.bsi.ac.id/ejurnal/index.php/widyacipta

Shiyamy, A. F., Rohmat, S., & Sopian, A. (2021). Artikel analisis pengendalian kualitas produk dengan. Jurnal Ilmiah Manajemen, 2(2), 32–45.

Suseno. (2022). Pengendalian. Cakrawala Ilmiah, 1(6), 1307–1320. about:blank

Syarifah Nazia, Safrizal, & Muhammad Fuad. (2023). Peranan Statistical Quality Control (Sqc) Dalam Pengendalian Kualitas: Studi Literatur. Jurnal Mahasiswa Akuntansi Samudra, 4(3), 125–138. https://doi.org/10.33059/jmas.v4i3.8079

Wicaksono, A., & Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ. Jurnal Teknologi Dan Manajemen Industri Terapan, 1(3), 145–154. https://doi.org/10.55826/tmit.v1iiii.44

Wirawati, S. M. (2019). Analisis Pengendalian Kualitas Kemasan Botol Plastik Dengan Metode Statistical Proses Control (SPC) Di PT. Sinar Sosro KPB PAndeglang. Jurnal InTent, 2(1), 94–102.

Downloads

Published

2024-06-13

How to Cite

Suprapto, G. P., & Donoriyanto, D. S. . (2024). Analysis of Product Quality Control Using FTA (Fault Tree Analysis) Method. International Journal of Economics Development Research (IJEDR), 5(2), 1513–1523. https://doi.org/10.37385/ijedr.v5i2.5154