Cigarette Smoke Detection And Cleaner Based On Internet Of Things (IoT) Using Arduino Microcontroller And MQ-2 Sensor

Authors

  • Yuda Irawan STMIK Hang Tuah Pekanbaru
  • Andre Wahyu Novrianto STMIK Hang Tuah Pekanbaru
  • Hafizh Sallam Multimedia University, Malaysia

DOI:

https://doi.org/10.37385/jaets.v2i2.218

Keywords:

Sensor Mq-2, Arduino Uno, Module ESP8266-01S, Module LCD

Abstract

The detector and neutralize cigarette smoke in the STMIK Hang Tuah Pekanbaru there is no. To simplify detector and neutralize cigarette smoke in the campus area made a system detector and neutralize cigarette smoke Arduino Uno microcontroller based using an notification iot. The whole tool is divided into several parts, consisting of sensor mq-2, module ESP8266-01S, module LCD, mikrokontroller arduino uno, buzzer, and DC FAN. This tool works when module ESP8266-01S looking for the nearest internet network and sensor mq-2 detect cigarette smoke, from module ESP8266-01S and sensor mq-2  then to Arduino Uno  microcontroller to process, from Arduino Uno  microcontroller then Turn on buzzer as a warning alarm and  Turn on DC FAN as a fan to neutralize cigarette smoke  which then transfers data through module ESP8266-01S to the website and give notification  the room detected cigarette smoke to the smartphone  head of equipment and officers. The results showed that the smoke content was more than 300 detected as cigarette smoke, because it has been to test the system to several prototypes and 2hen there is no cigarette smoke was value is less than 300.

References

Amin, M. M., Nugratama, M. A. A., Maseleno, A., Huda, M., & Jasmi, K. A. (2018). Design of cigarette disposal blower and automatic freshner using mq-5 sensor based on atmega 8535 microcontroller. International Journal of Engineering & Technology, 7(3), 1108-1113.

Handoko, P. (2017). Sistem Kendali Perangkat Elektronika Monolitik Berbasis Arduino Uno R3. Prosiding Semnastek.

Imtiaz, M. H., Senyurek, V. Y., Belsare, P., Nagaraja, K., & Sazonov, E. (2019, April). Development of a Smart IoT Charger for Wearable Cigarette Smoking Monitor. In 2019 SoutheastCon (pp. 1-5). IEEE.

Irawan, Y., Fernando, Y., & Wahyuni, R. (2019). Detecting Heart Rate Using Pulse Sensor As Alternative Knowing Heart Condition. Journal of Applied Engineering and Technological Science (JAETS), 1(1), 30-42.

Panpaeng, S., Phanpeang, P., & Metharak, E. (2018, November). Cigarette smoke detectors for non-smoking areas in the building. In 2018 22nd International Computer Science and Engineering Conference (ICSEC) (pp. 1-4). IEEE.

Ping, Z., Feng, W., & Haijing, X. (2010, July). The design of a capacitance sensor for the detection of cigarette packets lack. In 2010 2nd International Conference on Signal Processing Systems (Vol. 2, pp. V2-707). IEEE.

Ramady, G. D., Yusuf, H., Hidayat, R., Mahardika, A. G., & Lestari, N. S. (2020). Rancang Bangun Model Simulasi Sistem Pendeteksi Dan Pembuangan Asap Rokok Otomatis Berbasis Arduino. Jurnal Teknik Komputer AMIK BSI, 6(2), 212-218.

Sanger, J. B., Sitanayah, L., & Kumenap, V. D. (2019, November). Detection System for Cigarette Smoke. In 2019 4th International Conference on Information Technology, Information Systems and Electrical Engineering (ICITISEE) (pp. 145-149). IEEE.

Wilianto, W., & Kurniawan, A. (2018). Sejarah, cara kerja dan manfaat internet of things. Matrix: Jurnal Manajemen Teknologi dan Informatika, 8(2), 36-41.

Zhang, D., Jiao, C., & Wang, S. (2018, December). Smoking Image Detection Based on Convolutional Neural Networks. In 2018 IEEE 4th International Conference on Computer and Communications (ICCC) (pp. 1509-1515). IEEE.

Downloads

Published

2021-05-09

How to Cite

Yuda Irawan, Novrianto, A. W., & Sallam, H. (2021). Cigarette Smoke Detection And Cleaner Based On Internet Of Things (IoT) Using Arduino Microcontroller And MQ-2 Sensor . Journal of Applied Engineering and Technological Science (JAETS), 2(2), 85–93. https://doi.org/10.37385/jaets.v2i2.218