Performance Analysis of a Mechanical System To Break and Separate Palm Nut-Fibre Cake

Authors

  • Prince Yaw Andoh Andoh Kwame Nkrumah University of Science and Technology
  • Kofi Owura Amoabeng Kwame Nkrumah University of Science and Technology
  • Charles Kofi Kafui Sekyere Kwame Nkrumah University of Science and Technology
  • D E K Dzebre Kwame Nkrumah University of Science and Technology

DOI:

https://doi.org/10.37385/jaets.v4i1.509

Keywords:

Oil palm, Nut-fibre cake, Separator, Efficiency, Throughput capacity

Abstract

This research seeks to test the performance of a palm nut-fibre cake breaker and separator machine to alleviate the problem of hand separation by local oil producers. It takes into consideration the standard cylindrical shape of a palm nut-fibre cake. The machine operated on an electric motor of 2.2 kW at 1420 rpm. The average throughput capacity of the machine was 107.72 kg/hr with the capacity weight of 120 kg. Test results indicated a separation efficiency of 92%. Also, cost estimation indicated that the annual savings in using the machine with less labour than manual labour entirely was $466. The study outcome is relevant to small-scale producers on the need to utilize a cost-effective machine to facilitate a high separation yield of nuts and fibres from the cake obtained from processing palm oil and improve the production output of palm kernel oil processed from the nuts.

Downloads

Download data is not yet available.

References

Adzimah, S. K., & Seckley, E. (2009). Modification in the design of an already existing palm nut-fibre separator. African Journal of Environmental Science and Technology, 3(11).

Altman, D. G., & Bland, J. M. (2005). Standard deviations and standard errors. Bmj, 331(7521), 903.

Alade, E. I., Koya, O. A., & Omidiji, B. V. (2020). Development of a modified palm-nut cracker. Agricultural Engineering International: CIGR Journal, 22(1), 202-212.

Assian, U. E., Okoko, J. U., Alonge, F. A., Udoumoh, U. I., & Ehiomogue, P. (2022). Development of sustainable products from oil palm towards enhancing national food security: A review. Poljoprivredna tehnika, 47(1), 15-33.

Binuyo, G. O., Owolarafe, O. K., Ogunsina, B. S., Obayopo, S. O., Morakinayo, A. T., OKORIE, V. O., ... & Falana, O. B. (2022). Appraisal of Technological Capability of Selected Palm Oil Mills for Production of Special Palm Oil in Nigeria. Available at SSRN 4087757.

Israel, A. E., Koya, O. A., & Omidiji, B. V. (2020). Development of a modified palm-nut cracker. Agricultural Engineering International: CIGR Journal, 22(1).

Lawal, A. S. & Malachi, I. O. (2019). Development and Performance Assessment of an Improved Palm Oil Digester. International Journal of Technical & Scientific Research Engineering, 2(2), 15-29.

Murphy, D. J., Goggin, K., & Paterson, R. R. M. (2021). Oil palm in the 2020s and beyond: challenges and solutions. CABI Agriculture and Bioscience, 2(1), 1-22.

Mutsaers, H. J. W. (2019). The challenge of the oil palm: using degraded land for its cultivation. Outlook on Agriculture, 48(3), 190-197.

Nduka, N. B., Okay, O. A., & Jonah, A. C. (2012). Design, fabrication and evaluation of palm nut-pulp separator. Journal of Emerging Trends in Engineering and Applied Sciences, 3(1), 144-151.

Obincowelds Construction, “Palm nut-fibre seperator”, 2015. http://obincoweldconst.blogspot.com/2015/05/palm-fruit-fibre-separator.html.

Okolie, C., Oluwadare, B., Ezenwa, O. & Azaka, O. (2018). Design and Production of Palm Nut and Fibre Separating Machine. Advances in Research, 17(2), 1-8.

Ola, F. A., Akande, F. B., Ogunremi, I. O., Balogun, A. L., & Busari, R. A. (2020). Selected Engineering Properties of Palm Nut (Elaeis Guineensis) Required in The Design Of Palm Kernel-Shell Separator. Lautech Journal of Engineering and Technology, 14(2), 49-54.

Ologunagba, F. O., Olutayo, L. A., & Ale, M. O. (2010). Development of Palm Kernel nut and Fibre Separator. ARPN Journal of Engineering and Applied Science.,5(12): 11, 14.

Otoo, K. N. (2018). Minimum wage fixing in Ghana. In Labour Research and Policy Institute of Trade Union Congress Policy Paper.

Quartey, J. D., & Ametorwotia, W. D. (2017). Assessing the total economic value of electricity in Ghana.

Downloads

Published

2022-08-15

How to Cite

Andoh, P. Y. A., Kofi Owura Amoabeng, Charles Kofi Kafui Sekyere, & D E K Dzebre. (2022). Performance Analysis of a Mechanical System To Break and Separate Palm Nut-Fibre Cake . Journal of Applied Engineering and Technological Science (JAETS), 4(1), 24–31. https://doi.org/10.37385/jaets.v4i1.509